Sampler Track V4 Cubase 12

today we cover

Sampler Track V4 Cubase 12

Pitch Section

Filter Section

Amp Section

Pitch Section

In the Pitch section, you can adjust the tuning and the pitch of your audio sample. The pitch envelope allows you to modulate the pitch over time.

Show/Hide Pitch Modulators

Shows/Hides the pitch envelope and the LFO editor in the waveform window.

Octave

Sets the pitch of the sample in octave steps.

Coarse

Sets the pitch of the sample in semitone steps.

Fine

Fine-tunes the pitch of the sample in cents (hundredths of a semitone).

LFO

Allows you to select the LFO and to set the LFO modulation depth.

Glide

Specifies the time that is needed to bend the pitch of the sample from one note to the following note. If you move this control all the way to the left, Glide is deactivated.

If Fingered is activated, the pitch only glides between notes that are played legato.

Pasted from <https://steinberg.help/cubase_pro/v12/en/cubase_nuendo/topics/sampler_track/sampler_track_section_pitch_r.html>

Filter Section

In the Filter section, you can adjust the tone color of the sample sound. The filter envelope allows you to control the cutoff frequency to shape the harmonic content over time.

Filter On/Off

Activates/Deactivates the filtering effect.

Show/Hide Filter Modulators

Shows/Hides the filter envelope and the LFO editor in the waveform window.

Type

Sets the filter type.

Shape

Sets the filter shape.

Cutoff

Controls the cutoff frequency of the filter.

Resonance

Sets the filter resonance.

Drive

Determines the level of the input signal and thus, the amount of saturation.

Cutoff Key Follow

Sets the cutoff modulation via the note number. Increase this parameter to raise the cutoff with higher notes. At 100 %, the cutoff frequency follows the played pitch exactly.

LFO

Allows you to select the LFO and to set the LFO modulation depth.

Pasted from <https://steinberg.help/cubase_pro/v12/en/cubase_nuendo/topics/sampler_track/sampler_track_section_filter_r.html>

Amp Section

In the Amp section, you can set the volume and the pan of the sample. The amplifier envelope allows you to shape the volume over time.

Show/Hide Amp Modulators

Shows/Hides the amp envelope and the LFO editor in the waveform window.

Volume

Sets the level of the sample.

Volume LFO

Allows you to select the volume LFO and to set the volume LFO modulation depth.

Pan

Sets the position of the sample in the stereo panorama.

Pan LFO

Allows you to select the pan LFO and to set the pan LFO modulation depth.

Pasted from <https://steinberg.help/cubase_pro/v12/en/cubase_nuendo/topics/sampler_track/sampler_track_section_amp_r.html>